적용분야Markets

건설기계 & 중장비Construction & Heavy Machinery

Home  ›  적용분야Markets  ›  건설기계 & 중장비Construction & Heavy Machinery
CONSTRUCTION & HEAVY MACHINERY

건설기계 & 중장비Construction & Heavy Machinery

굴삭기, 로더, 크레인 등 건설·중장비는 진흙, 분진, 수분 유입과 반복되는 고하중·충격이 공존하는 가혹한 환경에서 작동합니다. 씰스타는 이러한 환경에서도 안정적인 실링 성능을 제공하는 유압·공압씰, 오일씰, 웨어링 등을 공급합니다.Excavators, loaders and cranes operate in harsh environments where mud, dust and water ingress meet repeated heavy loads and impact. Sealstar supplies hydraulic/pneumatic seals, oil seals and wear rings that deliver reliable sealing under these conditions.

주요 적용 부위Key Applications
굴삭기 붐·암·버킷 실린더Excavator boom/arm/bucket cylinders로더 리프트 실린더Loader lift cylinders크레인 아웃트리거Crane outriggers유압 펌프·모터Hydraulic pumps & motors주행 감속기Travel reduction gears
요구 성능Required Performance
1

내마모성 & 내충격성Wear & Impact Resistance

반복되는 고하중과 충격에도 마모를 최소화하는 소재 설계.Material design that minimizes wear under repeated heavy loads and impact.

2

오염물질 차단Contaminant Exclusion

진흙, 분진, 수분의 침투를 막아 내부 오일 오염을 방지.Blocks mud, dust and water to prevent internal oil contamination.

3

광범위한 온도범위 대응Wide Temperature Range

혹한부터 고온까지 안정적으로 작동하는 소재 적용.Materials that operate reliably from extreme cold to high heat.

4

장수명 설계Long Service Life

유지보수 주기를 늘려 장비 가동률(Uptime)을 높입니다.Extends maintenance intervals to raise equipment uptime.

부위별 유압씰 상세 검토Detailed Hydraulic Seal Review by Location

로드씰·피스톤씰·와이퍼 구성Rod seal, piston seal and wiper configuration

굴삭기·로더 실린더는 로드씰(외부 누유 방지), 피스톤씰(내부 압력 분리), 와이퍼(오염물 차단) 세 종류가 함께 구성됩니다. 로드씰은 우레탄, 피스톤씰은 PTFE·필드 우레탄, 와이퍼는 내마모 우레탄을 주로 사용하며, 실린더 압력·속도·행정에 따라 조합을 조정합니다.Excavator and loader cylinders combine three seal types — a rod seal (prevents external leakage), a piston seal (separates internal pressure) and a wiper (excludes contaminants). Rod seals are typically polyurethane, piston seals PTFE or filled polyurethane, and wipers wear-resistant polyurethane; the combination is adjusted for cylinder pressure, speed and stroke.

유압유 종류별 재질 선정Material selection by hydraulic fluid type

일반 광유계 작동유에는 NBR·우레탄이 무난하지만, 난연 작동유(HFA·HFB·HFC 계열)나 생분해성 작동유를 사용하는 설비는 FKM 등 내유체성이 다른 소재를 검토해야 합니다. 사용 중인 작동유 종류를 알려주시면 적합한 씰 재질을 확인해 드립니다.Standard mineral-based hydraulic fluid works well with NBR or polyurethane, but equipment running fire-resistant fluids (HFA/HFB/HFC types) or biodegradable fluids needs a different fluid-resistant material such as FKM. Tell us your hydraulic fluid type and we will confirm the right seal material.

분진·수분 침투 방지 설계Dust and moisture ingress protection design

토사·분진이 많은 현장에서는 더스트씰(와이퍼)의 립 형상과 재질이 실린더 수명을 좌우합니다. 이중 립 와이퍼나 금속 스크레이퍼를 함께 적용하면 오염물 유입을 추가로 줄일 수 있으며, 실제 필요한 방진 수준은 토사 종류와 노출 시간에 따라 달라집니다.In muddy, dusty job sites, the wiper's lip geometry and material largely determine cylinder life. A dual-lip wiper or an added metal scraper can further reduce contaminant ingress; the level of protection actually needed depends on the soil type and exposure time.

관련 제품Related Products
자주 묻는 질문FAQ
굴삭기 붐·암 실린더처럼 진흙·분진이 많은 환경에는 어떤 씰이 필요한가요?What kind of seal is needed for muddy, dusty environments like excavator boom/arm cylinders?
오염물질 침투를 막는 더스트씰(와이퍼)과 고하중·충격에 강한 로드씰·피스톤씰을 함께 구성해야 합니다. 씰스타는 우레탄·PTFE 소재로 붐·암·버킷 실린더용 씰키트를 공급합니다.You need a dust seal/wiper to exclude contaminants along with wear-resistant rod and piston seals rated for heavy load and impact. Sealstar supplies polyurethane and PTFE seal kits sized for boom, arm and bucket cylinders.
크레인 아웃트리거나 유압 펌프·모터에도 같은 씰을 쓰나요?Do crane outriggers and hydraulic pumps/motors use the same seals?
아웃트리거는 장시간 정지 상태에서의 정적 밀봉 안정성이 중요하고, 펌프·모터는 회전축을 밀봉하는 오일씰이 필요해 부위별로 씰 구성이 다릅니다. 씰스타는 적용 부위의 작동조건에 맞춰 씰을 개별 구성해 공급합니다.Outriggers need static-seal stability through long stationary periods, while pumps and motors need rotary oil seals on the shaft — the seal configuration differs by location. Sealstar configures each seal to the operating conditions of its specific application point.
건설장비용 씰의 사용 온도 범위는 어떻게 되나요?What temperature range do construction-equipment seals need to cover?
혹한기 야외 대기부터 유압계통 가동 중 발생하는 고온까지 대응해야 하며, 우레탄·NBR·PTFE 등 재질에 따라 사용 가능한 온도가 달라집니다. 실제 운전조건(기온·유온)을 알려주시면 적합한 재질을 확인해 드립니다.Seals must handle everything from freezing outdoor standby to the high heat generated during hydraulic operation; the usable range depends on the material — polyurethane, NBR or PTFE. Tell us your actual operating conditions (ambient and fluid temperature) and we'll confirm the right material.

해당 산업 적용 사양이 궁금하신가요?Need specs for this industry?

도면이나 사용 조건을 알려주시면 담당자가 확인 후 신속히 답변드립니다.Send us your drawings or operating conditions and we will respond promptly.

문의하기Contact Us

전체 적용분야 보기View All Industries