석유·가스·화학 플랜트는 고압, 고온, 부식성 유체(Sour Gas 등)가 동시에 작용하는 대표적인 가혹 환경입니다. 씰스타는 API·NORSOK 등 국제 규격에 대응 가능한 내화학성 오링과 유압씰로 플랜트 설비의 안전한 운전을 지원합니다.Oil, gas and chemical plants are archetypal harsh environments where high pressure, high temperature and corrosive fluids (such as sour gas) act at once. Sealstar supports safe plant operation with chemical-resistant O-rings and hydraulic seals meeting international standards like API and NORSOK.
황화수소(H₂S) 등 부식성 유체에 대한 저항성.Resistance to corrosive fluids such as hydrogen sulfide (H₂S).
급격한 압력 변화에도 팽윤·파열 없는 내구성.Durability without swelling or rupture under rapid pressure change.
플랜트 운전 조건에 맞춘 안정적 실링 성능.Stable sealing performance matched to plant operating conditions.
API 등 설비 규격과 NORSOK M-710·ISO 23936-2 등 소재 시험 규격을 구분해 요구사항에 맞는 컴파운드를 검토.Reviewing compounds against equipment standards such as API and material-test standards such as NORSOK M-710 and ISO 23936-2, each considered on its own terms.
유정·플랜트 설비는 API 6A 등 설비 규격에서 요구하는 사양에 맞춰, NORSOK M-710·ISO 23936-2 등 소재 시험 규격에서 요구하는 급속감압(RGD) 저항성과 내약품성을 통과한 소재를 지정하는 경우가 많습니다. 적용 규격과 시험 항목을 알려주시면 대응 가능한 소재를 확인해 드립니다.Wellhead and plant equipment often specifies materials that meet the rapid-gas-decompression resistance and chemical-compatibility testing required by material standards such as NORSOK M-710 and ISO 23936-2, in line with equipment-level specifications like API 6A. Tell us the applicable standard and test items and we will confirm which materials can meet them.
사우어가스 설비는 금속부품에 적용되는 NACE MR0175/ISO 15156 요구사항과 별도로, 엘라스토머 씰의 H2S 내약품성 및 급속감압 저항성을 확인해야 합니다. 씰 컴파운드는 ISO 23936-2, NORSOK M-710 또는 고객 지정 시험조건을 기준으로 검토하며, HNBR이나 FEPM(Aflas)이 주로 후보로 검토됩니다. 저온 성능이 함께 필요한 경우 HNBR을, 고온·강산 조건에는 FEPM을 우선 검토하는 경향이 있습니다.Sour-gas equipment requires H2S chemical resistance and rapid-gas-decompression resistance for the elastomer seal, separate from the NACE MR0175/ISO 15156 requirements that apply to metallic components. Seal compounds are reviewed against ISO 23936-2, NORSOK M-710 or customer-specified test conditions, with HNBR and FEPM (Aflas) the materials most often considered. HNBR tends to be favored where low-temperature performance also matters, while FEPM is often preferred for high-temperature, strongly acidic conditions.
배관·밸브 내부 압력이 급격히 낮아지는 조건에서는 일반 FKM도 손상될 수 있어, RGD 저항성이 검증된 전용 FKM 등급이나 HNBR·FFKM을 압력 조건에 맞춰 선정합니다. 실제 감압 속도와 최고 압력을 확인해 적합한 등급을 검토합니다.Where internal pressure in piping or valves drops rapidly, even standard FKM can be damaged, so dedicated RGD-resistant FKM grades or HNBR/FFKM are selected to match the pressure conditions. The actual decompression rate and peak pressure are checked to review the right grade.
도면이나 사용 조건을 알려주시면 담당자가 확인 후 신속히 답변드립니다.Send us your drawings or operating conditions and we will respond promptly.