조선해양 산업은 해상이라는 특수한 환경에서 요구되는 제품 성능과 신뢰성에 대한 기대치가 매우 높은 분야입니다. 씰스타는 해수 부식, 염분, 진동, 장기간의 하중에도 견디는 내구성 높은 씰링 솔루션으로 선박 및 해양플랜트 설비의 안정적인 운용을 지원합니다.Shipbuilding and marine is a field with very high expectations for performance and reliability in the demanding offshore environment. Sealstar supports the stable operation of vessels and offshore facilities with durable sealing solutions that withstand seawater corrosion, salinity, vibration and long-term loading.
장기간의 해수·염분 노출에도 변형과 부식이 없는 내구성.Durability without deformation or corrosion under prolonged seawater and salt exposure.
반복되는 축 회전과 진동에도 안정적인 밀봉 성능을 유지.Stable sealing under repeated shaft rotation and vibration.
혹한의 해상 환경에서도 탄성을 잃지 않는 소재 설계.Materials that retain elasticity in cold, humid marine conditions.
DNV, ABS 등 주요 선급 규격에 부합하는 소재.Materials compliant with major class societies such as DNV and ABS.
해수와 직접 접촉하는 씰은 염분·자외선 노출에 따른 경화·균열을 고려해 EPDM이나 내후성이 강화된 컴파운드를 주로 검토합니다. 냉각수 계통이나 밸러스트 배관처럼 접촉 빈도가 높은 부위는 재질 선정이 더 중요합니다.Seals in direct contact with seawater primarily consider EPDM or weather-resistant compounds to withstand hardening and cracking from salt and UV exposure. Material selection matters even more for high-contact locations such as cooling-water systems or ballast piping.
스러스터·러더 축은 저속·고하중 회전과 해수 압력이 동시에 걸려, 일반 오일씰보다 다중 립 구조나 메커니컬씰을 검토하는 경우가 많습니다. 축경·수심(압력)·회전속도를 알려주시면 적합한 구조를 확인해 드립니다.Thruster and rudder shafts see low-speed, high-load rotation combined with seawater pressure, so multi-lip designs or mechanical seals are often considered over a standard oil seal. Tell us the shaft diameter, depth (pressure) and rotation speed and we will confirm the right structure.
선체·배관 주변 씰은 방오 도료 용제나 저유황 연료(IMO 2020 대응 연료) 등 새로운 화학물질에 대한 내약품성도 함께 검토해야 합니다. 접촉하는 도료·연료의 성분을 확인 후 적합한 소재를 선정합니다.Seals near the hull and piping also need chemical resistance to newer substances such as antifouling coating solvents and low-sulphur (IMO 2020) fuels. Material selection follows a check of the actual coating or fuel composition involved.
도면이나 사용 조건을 알려주시면 담당자가 확인 후 신속히 답변드립니다.Send us your drawings or operating conditions and we will respond promptly.